sales@1machinery.com
|
|
+1-819-346-2369 sales@1machinery.com |
Specifications
| Ask for quotation | |
| Stock ref. # 1167 |
|
|
Other specifications
4" TOS VARNSDORF 5-AXIS CNC TABLE TYPE HORIZONTAL BORING MILL, 1998 Diameter of Spindle 3.94" Taper in Spindle ISO 50 w/ Power Lock Spindle Travel (W-Axis) 24.8" Table Cross Travel (X-Axis) 49.21" Headstock Vertical Travel (Y-Axis) 44" Saddle Travel (Z-Axis) 37" Rotary Table Working Surface 39.34" x 44" Maximum Table Load 6,600 Lbs. Maximum Height of Spindle Center to Table 45.97" Minimum Height of Spindle Center to Table 1.97" Number of Positions of Rotary (B-Axis) 360,000 Width Across (3) Bed Ways 62" Diameter of Spindle Support Extension 8.72" Diameter of Center Hole in Table 3.94" Depth of Center Hole in Table .51" Spindle Speeds 10 to 1800 RPM (4 speed ranges) Spindle Motor 27 H.P. AC Drive Work Feed Range .157 to 63IPM Rapid Traverse Rate for X,Y,Z & W Axis' 256 IPM Rapid Traverse Rate for Rotary Table 2 RPM Spindle may be oriented into any position with an angle increment of 0.1° Machine Floor Space 191"W x 138"D x 131½" High Machine Weight 30,500 Lbs. Equipped With: Heidenhain TNC426C 5-Axis CNC Control w/Remote Pendant, Color CRT Graphics, Simultaneous Motion in 3-Axis Linear & 2-Axis Circular Interpolation, Threading Cycle & Swing Arm Mount Built-In T-Sloted Power Rotary Table Graduated into 720 minutes w/ B-Axis CNC Control Quill Type Spindle Design Spindle Extension Bearing Supports Ball Screws w/ Seimans AC Servos and 611A Simodrive Built-in 3-Way Bed All HArdened & Ground Ways Bedway & Saddle Way Covers Automatic Lubrication Light of 4 x 90° Rotary Table Optics Hydraulic Clamping 3/50/400 Volt Electrics W/ Transformer Tooling Included: (2) Offset Boring Bars Pullstud Set (6) No. 50 Toolholder (1) No. 50 Stub Bars (14) Collets Tapping Head with (10) Collets Set Up & Tie Down Tooling
Photos
|
Machinery
Inc. |