sales@1machinery.com
|
|
+1-819-346-2369 sales@1machinery.com |
Specifications
| Ask for quotation | |
| Stock ref. # 1524 |
|
|
Other specifications
1.5" x 30' - 1000 TON HUGH SMITH COMBINED SHIPYARD ROLLS PRESS BRAKE, 1968 MANUFACTURER: HUGH SMITH YEAR: 1968 (INSTALLED IN 1974) SERIAL NO.: C26916 CAPACITY: 38.1 MM X 9144 MM PRESS BRAKE UPPER RAM SPEEDS: APPROACH - DESCENT BY GRAVITY: 18"/MIN. PRESS - DESCENT IN WORKING MODE: 9"~11.4"/MIN. RETURN(UPWARD SPEED): 84"~102"/MIN. OPERATING PRESSURE: 5000 PSI (500 TONS) CENTRE ROLLERS ADJ. CYLS. - 2000 PSI TOP AND BOTTOM WEDGE GEAR CYLS. - 4500 PSI PLATE ROLLING SPEEDS: 14 FEET/MIN. MAXIMUM PLATE ROLLING WIDTH: 30 FEET (9144 MM) DIAMETER OF SUPERIOR ROLL: 15" Ø DIAMETER OF BOTTOM ROLLS: 13" Ø CENTER TO CENTER POSSIBLE OF ROLLS: 18";22";26" EQUIPPED WITH: - COMPENSATION SYSTEM OF FLEXING BOTTOM AND TOP ROLLS. - CONTROL DESK - (2) 45 HP CROFTS MOTORS (DRIVE THE GEARBOX) - (2) 25 HP MOTORS (ELECTRAULIC PUMP) OVERALL DIMENSIONS: OVERALL HEIGHT FROM GROUND LEVEL: 19'-7.75" (5988MM) GROUND LEVEL TO FOUNDATION LEVEL: 7' (2133MM) OVERALL LENGTH: 50' (15240MM) DEPTH OF THE MACHINE ONLY: 15'3" (4648 MM) OVERALL DEPTH INCLUDING CONTROL DESK + ELECTRICAL PANEL: 28' (8534 MM) This machine can’t bend complete cylinders although half cylinders are possible down to a minimum inside diameter of 600 mm. for normal grade steels. SHIPPING INFOS: - (3) 40' O.T. - for small components. - (1) 40' O.T. HIGH CUBE HARD TOP - bottom beam - (2) 40' O.T. HIGH CUBE HARD TOP or (2) 40' FLAT RACK - end cheek assembly - (1) 40' flat rack - TOP BEAM (WEIGHT BY CRANE: APPROX. 28 TON) DIMENSIONS: 1065 x 289.5 x 105 cm NOTE: MACHINE HAS BEEN BOUGHT IN 1995 AND THE CUSTOMER NEVER REINSTALL IT. PACKING LIST AVAILABLE ON DEMAND. AVALABILITY: IMMEDIATE. ALREADY DISMANTLE & READY TO BE SHIPPED! REPLACEMENT VALUE: $3.5 TO 4 MILLIONS
Photos
|
Machinery
Inc. |