sales@1machinery.com
|
|
+1-819-346-2369 sales@1machinery.com |
Specifications
| Ask for quotation | |
| Stock ref. # 0390 |
|
|
Other specifications
FARREL 33’ 5-Axis CNC Gantry Type Vertical Boring Mill Built in 1967 – Out of Service from 1980 to 1989 ALLEN BRADLEY Model 8600 CNC Control - Installed in 1995 WITH LIVE SPINDLES ON BOTH RAM HEADS Table Diameter: 33’ (10,000 MM) Maximum Distance Between Columns: 35’ (10,668 MM) Vertical Travel of Cross Rail on Columns: 18’9” Vertical Travel of Rams: 14’3” Cross Travel of Each Ram Head on Rail: 32’7” Distance From Table to Bottom of Ram: 25’1” Max. (7,645 MM)(Cross Rail Up – Ram Retracted) 6’4” Min. (Cross Rail Down – Ram Retracted) Longitudinal Travel of Gantry on Bed Ways: 66’ Table Speeds: Constant Torque: .2 to 2.8 RPM; Constant Horsepower: 2.7 to 11 RPM Table Load Capacity – Uniformly Distributed: 500 Tons Vertical Travel of Ram Spindle: 4’ Dimensions of (2) Ram Heads: 28” Square Taper in Live Spindle Heads: No. 7 M.T. Diameter of Live Spindles: 8” Speed Range on Live Spindles: 2.5 to 400 RPM Feed Rates to Rams: .015 to 50 IPM Traverse Rate to Gantry: 150 IPM Traverse Rate of Cross Rail: 11-1/2 IPM Table Has Indexing or Milling Capabilities Motor: 150 HP Vari-Voltage Table Drive and Complete Electrics Overall Height From Floor to Top of Rams: 48’9” Complete With: Hydrostatic Bearing Surfaces for Table and Columns Along Bed Ways; (2) Vertical Ram Head With Live Spindles; Right Angle Attachment for Either Ram Head with No. 50 Taper; Allen Bradley Model 8600 CNC Control Available at Extra Cost: (10) 8’ x 12’ x 1’ T-Slotted Floor Plates, T-Slots on 24” Centers The gantry will operate on parallel machined runways, providing access to the 33’ diameter vertical boring mill table and perform the operations usually done on a horizontal as well as a vertical boring mill. INSPECT UNDER POWER! VIDEO AVAILABLE!
Photos
|
Machinery
Inc. |