Spécifications

 Catégorie : Aléseuses Horizontales à Table CNC

Demande de soumission
  Référence # 1167

  Manufacturier TOS
  Modèle WH-10
  Année 1998
  Dia. Broche 4"
  Axe X 49"
  Axe Y 44"
  Dimension Table 39" x 44"
  RPM 1800
  Moteur 27 HP
  Contrôle HEIDENHAIN
  Prix VENDU!

 

Autres spécifications

 

                  4" TOS VARNSDORF 5-AXIS CNC TABLE TYPE HORIZONTAL BORING MILL, 1998

                  Diameter of Spindle 3.94"

                  Taper in Spindle ISO 50 w/ Power Lock

                  Spindle Travel (W-Axis) 24.8"

                  Table Cross Travel (X-Axis) 49.21"

                  Headstock Vertical Travel (Y-Axis) 44"

                  Saddle Travel (Z-Axis) 37"

                  Rotary Table Working Surface 39.34" x 44"

                  Maximum Table Load 6,600 Lbs.

                  Maximum Height of Spindle Center to Table 45.97"

                  Minimum Height of Spindle Center to Table 1.97"

                  Number of Positions of Rotary (B-Axis) 360,000

                  Width Across (3) Bed Ways 62"

                  Diameter of Spindle Support Extension 8.72"

                  Diameter of Center Hole in Table 3.94"

                  Depth of Center Hole in Table .51"

                  Spindle Speeds 10 to 1800 RPM (4 speed ranges)

                  Spindle Motor 27 H.P. AC Drive

                  Work Feed Range .157 to 63IPM

                  Rapid Traverse Rate for X,Y,Z & W Axis' 256 IPM

                  Rapid Traverse Rate for Rotary Table 2 RPM

                  Spindle may be oriented into any position with an angle increment of 0.1°

                  Machine Floor Space 191"W x 138"D x 131½" High

                  Machine Weight 30,500 Lbs.

                 

                  Equipped With:

                  Heidenhain TNC426C 5-Axis CNC Control

                  w/Remote Pendant, Color CRT Graphics,

                  Simultaneous Motion in 3-Axis Linear &

                  2-Axis Circular Interpolation, Threading

                  Cycle & Swing Arm Mount

                  Built-In T-Sloted Power Rotary Table Graduated

                  into 720 minutes w/ B-Axis CNC Control

                  Quill Type Spindle Design

                  Spindle Extension Bearing Supports

                  Ball Screws w/ Seimans AC Servos and 611A Simodrive

                  Built-in 3-Way Bed

                  All HArdened & Ground Ways

                  Bedway & Saddle Way Covers

                  Automatic Lubrication

                  Light of 4 x 90° Rotary Table Optics

                  Hydraulic Clamping

                  3/50/400 Volt Electrics W/ Transformer

                 

                  Tooling Included: (2) Offset Boring Bars

                  Pullstud Set

                  (6) No. 50 Toolholder

                  (1) No. 50 Stub Bars

                  (14) Collets

                  Tapping Head with (10) Collets

                  Set Up & Tie Down Tooling

Photos de la machine

 

Machinerie Inc.
© 1998-2010 Machinerie Inc. Tous droits réservés.