Spécifications

 Catégorie : Aléseuses Horizontales CNC

Demande de soumission
  Référence # 1666

  Manufacturier PARPAS
  Modèle LHS
  Année 2006
  Dia. Broche 5"
  Axe X 256"
  Axe Y 79"
  RPM 5000
  Moteur 40 HP
  Contrôle HEINDENHAIN
  Inclus *
  Prix VENDU!

 

Autres spécifications

 

                  PARPAS LHS 5 AXIS(3+2) CNC HORIZONTAL BORING MILL, 2006 WITH HEIDENHAIN ITNC530

                 

                  HORIZONTAL COLUMN TRAVEL, X-AXIS 6500 MM (255.90")

                  VERTICAL HEAD TRAVEL, Y-AXIS 2000 MM (78.74")

                  RAM TRAVEL, Z-AXIS 1250 MM (49.21")

                  RAM CROSS SECTION 508 MM X 432 MM (20" X 17")

                  SPINDLE TAPER ISO 50

                  SPINDLE SPEEDS 10-5000 RPM

                  RAPID FEED/TRAVERSE RATE 0-40005 MM/MIN

                 

                  DIRECT DRIVE SPINDLE MOTOR:

                  SPINDLE MOTOR, CONTINUOUS 30 KW (40 HP)

                  TORQUE 191 NM

                  MAXIMUM SPEED 5000 RPM

                  CONSTANT POWER RANGE 1500-5000 RPM

                 

                  SPINDLE MOTOR WITH 2-SPEED GEARBOX SYSTEM:

                  SPINDLE MOTOR, CONTINUOUS 30 KW(40 HP)

                  TORQUE 760 NM

                  MAXIMUM SPEED 5000 RPM

                  CONTANT POWER RANGE 375-5000 RPM

                 

                  TOE 29 CNC ORTHOGONAL MILLING HEAD:

                  ORIENTATION FROM RAM FACE, A-AXIS 90 DEGREES

                  INDEXING .001 DEGREES

                  HEAD RANGE, A-AXIS +/- 110 DEGREES

                  C-AXIS CONTINOUS ROTATION

                  SPINDLE SPEED, MAXIMUM 22,000 RPM

                  SPINDLE POWER 31 KW (42 HP)

                  TORQUE 115 NM

                  SPINDLE TAPER HSK 63A

                 

                  TU600 REMOVABLE CNC UNIVERSAL MILLING HEAD:

                  ORIENTATION FROM RAM FACE, A-AXIS 45 DEGREES

                  INDEXING .001 DEGREES

                  POSITIONS, A-AXIS CONTINUOUS

                  HEAD RANGE +/- 180 DEGREES

                  SPINDLE TAPER ISO 50

                  SPINDLE SPEED, MAXIMUM 5000 RPM

                  TOOL RETENTION POWER DRAW BAR

                 

                  TPM STRAIGHT EXTENSION SPINDLE MOTOR INTEGRATED MILLING HEAD

                  POWER 30 KW (40 HP)

                  SPINDLE SPEED 5000 RPM

                  LENGTH 399 MM (15.7")

                  SPINDLE TAPER ISO 50

                  TOOL RETENTION POWER DRAW BAR

                 

                  INFEEDING CONTOURING ROTARY TABLE: (2-AXIS CNC)

                  TABLE SIZE 2000 MM X 1600 MM (78.74" X 63")

                  TABLE ROTATION, B-AXIS 360,000 POS

                  TABLE WEIGHT CAPACITY 19972 KG (44,000 LBS)

                  TABLE INFEED, W-AXIS 1500 MM (59")

                  MAXIMUM ROTATION RATE 2 RPM

                  POSITIONING ACCURACY +/- 0.002 DEGREES

                 

                  EQUIPPED WITH:

                 

                  HEIDENHAIN ITNC 530 CNC CONTROL W/ 264 MM COLOR MONITOR

                  60 STATION AUTOMATIC TOOL CHANGER

                  HIGH PRESSURE THRU-SPINDLE COOLANT SYSTEM, 150 PSI

                  HEIDENHAIN ABSOLUTE POSITIONING LINEAR SCALES

                  RIGID TAPPING

                  POWER DRAW BAR, PULL STUD TYPE

                  HARDENED STEEL SLIDEWAYS

                  HYDRO-PNEUMATIC COMPENSATION COUNTER BALANCE SYSTEM

                  ELECTRONIC SPINDLE MONITORING SYSTEM

                  3988 MM X 2489 MM (157" X 98") T-SLOTTED FLOOR PLATES

                  FULL LENGTH AUTOMATIC CHIP CONVEYOR

                  OPERATORS PLATFORM

                  ROLL UP WAY COVERS ON Y-AXIS

                  TELESCOPIC STEEL WAY COVERS ON X & W AXIS

                  PAPER FILTRATION SYSTEM

                  30 KW SPINDLE MOTOR

Photos de la machine

 

Machinerie Inc.
© 1998-2010 Machinerie Inc. Tous droits réservés.