Spécifications

 Catégorie : Tours Verticaux CNC

Demande de soumission
  Référence # 1783

  Manufacturier TOSHIBA
  Modèle TMD-16
  Année 1995
  Dia. Table 63"
  Dia. Max. 78.8"
  Sous bras 45.3"
  Capacité 5 Ton
  RPM 280
  Moteur 60 HP
  Contrôle FANUC 15TA
  Prix VENDU!

 

Autres spécifications

 

                  TOSHIBA TMD-16 CNC VERTICAL BORING MILL WITH LIVE MILLING

                  SERIAL NUMBER 420089; BUILT 1995

                 

                  MACHINE FEATURES AUTOMATIC TWO PALLET CHANGER (APC), FULL "C" AXIS WITH LIVE MILLING SPINDLE, 24 ATC, TWO 63" DIAMETER CHUCKS, AND FANUC 15TA CONTROL

                 

                  Table diameter--63"

                  Maximum swing--78.8"

                  Maximum height top of table to bottom of ram--53"

                  Maximum cutting height--45.3"

                  Maximum cutting diameter--78.7"

                  Maximum load on table--11,000 lbs.

                  Travels--

                  horizontal travel of rail head; -31.7", +44.1"

                  vertical travel of ram; 31.7"

                  vertical travel of cross rail; 19.7"

                  Table speeds (2 ranges)--1.6 to 280 rpm

                  Maximum table torque--15,900 ft-lbf

                  Milling spindle speeds--12.5 to 1,500 rpm

                  Feedrates--

                  X-axis 472 ipm rapid/0.1 to 78.7 feed

                  Z-axis 315 ipm rapid/0.1 to 78.7 feed

                  C-axis 800 degrees per minute rapid/11.8 degrees per minute feed

                  Automatic tool changer capacity (ATC)--24; 8 for turning/16 for milling

                  Taper in ram--no. 50

                  Section of ram--8.66" x 8.66"

                  Table drive motor--60/50 HP

                  Milling spindle drive motor--20/14.7 HP

                  Power requirement--200/220 volts; 100 kVA

                  Equipped with;

                  automatic two pallet changer (APC)

                  24 tool capacity automatic tool changer (ATC)

                  turning and milling tool holders

                  chuck top jaws

                  (2) 63" diameter chucks

                  coolant tank and pump

                  Mayfran chip conveyor recently installed

                  ATC tool hoist

                  tool measurement presetter

                  Fanuc 15 TA CNC control

                 

                  Condition--good; inspect under power

                  Weight--72,200 pounds

                  Floor space--313" x 288" x 220" high (rail and ram in uppermost position)

Photos de la machine

 

Machinerie Inc.
© 1998-2010 Machinerie Inc. Tous droits réservés.